Preparation of mineralised matrices secreted from human primary osteoblasts for analysis of the interaction of cancer cells and the bone microenvironment

doi:10.1038/nprot.2008.237

Method Article

Preparation of mineralised matrices secreted from human primary osteoblasts for analysis of the interaction of cancer cells and the bone microenvironment

https://doi.org/10.1038/nprot.2008.237

This protocol has been posted on Protocol Exchange, an open repository of community-contributed protocols sponsored by Nature Portfolio. These protocols are posted directly on the Protocol Exchange by authors and are made freely available to the scientific community for use and comment.

Version 1

posted

You are reading this latest protocol version

Cell biology

Developmental biology

Biological techniques

prostate cancer

human primary osteoblasts

secreted matrix

mineralized matrix

bone matrix

Suitable matrices to study metastasis and cancer cell growth in the bone microenvironment have been limited to matrices consisting of specific proteins such as collagen or those secreted by immortalised cell lines. Use of the latter is restrictive since these lines retain characteristics representative of a particular stage of differentiation and often do not have the capacity to differentiate further. Thus, the matrix generated by the immortalised cell secretome will not be representative of the normal bone environment first seen by a tumour cell in the metastatic process.

We describe a method to produce and analyse matrices secreted by human primary osteoblasts grown in medium which promotes secretion of a mineralised matrix. Osteoblasts can be readily and efficiently removed to leave matrices which are free of cells, show a high degree of calcification and contain collagen type I which is representative of the bone matrix in vivo. These matrices are routinely used for culture of two prostate cancer cells lines, PC3 and LNCaP, which are easily harvested for molecular analyses. This in vitro system offers a more physiologically relevant environment to study the interaction of tumour cells and the bone microenvironment.

Alizarin red S (Sigma A5533)

Ammonium hydroxide (Sigma 320145)

Ascorbate-2-phosphate (Sigma A8960)

Bovine serum albumin (BSA) (Sigma A4919)

Collagen type I (Sigma C7661)

4',6-diamidino-2-phenylindole (DAPI) (Invitrogen D1306)

3,3′-diamino benzamidine tetrahydrochloride (DAB) (DAKO S3000)

Dexamethasone (Sigma D2915)

Ethylene diamine tetraacetic acid disodium salt (EDTA) (Ajax 180)

Fetal Calf Serum (FCS) (Invitrogen)

Fluorescein diacetate (FDA) (Invitrogen F1303)

Glutaraldehyde solution (Sigma G7651)

β-Glycerophosphate (Sigma G9891)

Hydrogen peroxide solution (30 % (w/w) in dH₂O) (Sigma H1009)

Minimum Essential Medium (MEM)-alpha (Invitrogen 12571-063)

Mouse anti-human collagen type 1 antibody (DSHB M-38)

Normal swine serum (Dako X0901)

Osmium tetroxide solution (2% in H₂O) (Fluka 75633)

Paraformaldehyde (PFA) (Sigma P6148)

Phosphate Buffered Saline (PBS) (Invitrogen 10010023)

Penicillin-Streptomycin (Penicillin 10000 U/ml and Streptomycin 10000 µg/ml Invitrogen 15140-122)

Propidium iodide (PI) (Invitrogen P3566)

Rhodamine-conjugated phalloidin (Invitrogen R415)

Sodium cacodylate (Sigma C4945)

Sterile distilled water (dH₂O) (Invitrogen 15230162)

Streptavidin HRP//Universal LSAB^™+Kit/HRP Rabbit/Mouse/Goat (Dako K0690)

Sucrose (Sigma S8501)

Triton X-100 (Invitrogen T9281)

Trypsin (0.25%) -EDTA (Invitrogen 25200056)

Trypsin (0.5%) -EDTA (Invitrogen 15400054)

REAGENT SETUP

Growth medium

Add 50 ml FCS and 5 ml Penicillin-Streptomycin to 500 ml MEM-alpha.

β-Glycerophosphate (1M)

Dissolve 2.16 g β-glycerophosphate in 10 ml dH₂O.

Filter sterilize, aliquot and store at -20°C.

Ascorbate-2-phosphate (50 mg/ml)

Dissolve 500 mg ascorbate-2-phosphate in 10 ml dH₂O.

Filter sterilize, aliquot and store at -20°C.

Dexamethasone (10^-5M)

Dissolve 414 mg dexamethasone in 10 ml dH₂O.

Filter sterilize, aliquot and store at -20°C.

Differentiation medium

Add 10 µl/ml β-glycerophosphate (1M), 1 µl/ml ascorbate-2-phosphate (50 mg/ml) and 1 µl/ml dexamethasone (10^-5M) to growth media.

Ammonium hydroxide (20 mM)

CAUTION. Corrosive. Open concentrated solutions in the fume hood.

Add 68 µl ammonium hydroxide to 50 ml dH₂O. Prepare fresh.

Paraformaldehyde (8%)

CAUTION. Harmful. Use in fume hood.

Add 100 ml PBS to 8 g PFA and then add 0.45 ml 1 M NaOH.

Stir in fume hood while heating to 60°C.

Adjust pH to 7.2-7.4 with 1 M NaOH.

Aliquot and store at -20°C.

To make 4% PFA working solution, add equal volumes of 8% PFA and PBS.

Glutaraldehyde fixative

CAUTION. Harmful. Use in fume hood.

Stock solutions:

0.1 M sodium cacodylate buffer in dH₂O, pH 7.4.

0.4 M sucrose in cacodylate buffer.

1.0 M calcium chloride in cacodylate buffer.

25% glutaraldehyde, store at 4°C.

For 100 ml of working solution, add 20 ml sucrose solution, 2 ml calcium chloride solution, and 12 ml glutaraldehyde solution to 66 ml cacodylate buffer. Store at 4°C.

DAPI staining solution

Dissolve the contents of one vial (10 mg) in 2 ml of dH₂O to make stock solution (5 mg/ml). Store at -20°C. Protect from light.

For staining solution (1.0 µg/ml), add 5 µl stock solution to 25 ml PBS. Prepare fresh. Protect from light.

Alizarin red S staining solution

Add 40 ml dH₂O to 500 mg alizarin red S.

Adjust pH to 4.1 with 0.5% ammonium hydroxide in dH₂O. CAUTION. Corrosive. Open concentrated solutions in the fume hood.

Make up to 50 ml with dH₂O.

3% hydrogen peroxide in PBS

Add 1 ml 30 % hydrogen peroxide solution to 9 ml PBS. Make fresh.

NPS blocking buffer

Add 1 ml of normal swine serum to 9 ml of PBS. Make fresh.

0.1% Triton X-100 in PBS

Add 2 ml of 20% Triton X-100 to 400 ml PBS. Store at room temperature.

Collagen type I coating buffer (5 µg/ml)

To prepare collagen type I stock solution (1 mg/ml), add 5 ml of 0.1 M acetic acid to 5 mg of collagen type I.

Rotate at room temperature for 3 h. Store at 4°C.

To prepare collagen type I coating buffer, dilute collagen type I stock solution to 5 µg/ml with dH₂O. In a cell culture hood, filter sterilize with 0.22 µm filter.

BSA blocking solution (2% BSA in PBS)

Dissolve 1 g of BSA in 50 ml of PBS. Filter sterilize with 0.22 µm filter. Store at 4°C.

0.5 mM EDTA in PBS

Add 400 µl of 0.5M EDTA (pH 8.0) to 400 ml PBS.

Sterilize by autoclaving. Store at room temperature.

FDA staining solution (2 µg/ml)

Add 5 µl of FDA stock (10 mg/ml) to 25 ml PBS. Prepare fresh. Protect from light.

PI staining solution (20 µg/ml)

Add 0.5 ml of stock PI solution (1 mg/ml) to 25 ml PBS. Prepare fresh. Protect from light.

0.2% Triton X-100 in PBS

Add 4 ml of 20% Triton X-100 to 400 ml PBS. Store at room temperature.

Rhodamine-conjugated phalloidin staining solution

Dissolve vial contents in 1.5 ml methanol to make 200 U/ml rhodamine-conjugated phalloidin stock solution. Store at -20°C.

For the staining solution (0.8 U/ml), dissolve 250 mg of BSA in 25 ml PBS and add 100 µl stock rhodamine-conjugated phalloidin solution. Prepare fresh. Protect from light.

0.05% trypsin/0.05 mM EDTA

Add 5 ml trypsin (0.5%) -EDTA to 45 ml PBS.

Store at 4°C for up to 2 weeks.

Isolation of primary human osteoblasts (hOBs)

Human osteoblast explants are obtained from patients undergoing knee replacement surgery after informed consent according to the ethical guidelines of the Helsinki II declaration and approved by the Human Ethics Committees of the Queensland University of Technology, the Prince Charles Hospital and the Princess Alexandra Hospital, Brisbane.

Collect samples under sterile conditions.
Under sterile conditions, harvest non-sclerotic, trabecular bone using a bone curette (diameter 5 mm) and transfer to sterile 50 ml tubes (Becton Dickinson, Sunnyvale, CA). Bone pieces are approximately 5 x 5 mm.
Wash and vortex trabecular bone with PBS for a minimum of 5 times until the PBS remains clear.
Incubate trabecular bone with 10 ml trypsin (0.25%)-EDTA for 3 min at 37°C in 5% CO₂.
Add 10 ml growth medium to inactivate trypsin.
Wash samples once with PBS.
Transfer trabecular bone to 175 cm² tissue culture flasks (Nunc, Rochester, NY) and top up with 12 ml of growth medium.
Culture at 37°C in 5% CO₂.
Osteoblast outgrowth can be observed after 5-7 days. Use cells expanded to the second or third passage for experiments. Two 175 cm² culture flasks at the third passage will give up to 15 x 10⁶ cells.

Growth and differentiation of hOBs

Culture hOBs in growth medium at 37°C in 5% CO₂.
Detach hOBs with trypsin (0.25%)-EDTA (4-5 ml/ 175 cm² tissue culture flask).
Add 10 ml growth media to inactivate trypsin.
Transfer cells to a 15 ml disposable plastic tube and centrifuge at 1500 rpm for 5 min.
Resuspend in 10 ml of growth medium.
Remove aliquot of cells for counting. Generally at about 70% confluence approximately 3-4 x 10⁶ cells /175 cm² culture flask are collected.
Plate hOBs at a density of 3000 cells/cm² in growth media.
Grow hOBs at 37°C in 5% CO₂ until confluent with media changes every 3-4 days.
When confluent, change medium to differentiation medium.
Culture for 4 weeks to allow secretion of mineralized matrix changing media every 3-4 days.

Osteoblast removal to leave intact decellularized osteoblast matrix (OBM)

This method is based on a protocol originally used to generate extracellular matrix coated dishes using corneal endothelial cells (1). The following volumes apply to OBM preparations using cells cultured in a 24 well dish. Volumes can be modified for smaller or larger culture areas accordingly.

Process each 24 well (or 6 well) dish separately. Processing of a small number of samples simultaneously allows quick and careful washing of each individual matrix preparation and minimises disruption and detachment of the matrix.
Aspirate culture medium.
Carefully rinse by adding 1 ml sterile dH₂O and then aspirate.

CRITICAL STEP: All washes and rinses of the cells on the matrix and particularly the decellularized matrix must be done with extreme care so as not to disrupt or detach the OBM. We also routinely leave a residual amount of liquid overlying the matrix when using a vacuum aspirator. Carefully remove the remaining liquid with a standard pipettor using a 1000µl tip.

Add 1 ml of 20 mM ammonium hydroxide to each well.
Incubate at room temperature with occasional gentle agitation.
Check the status of the cultures microscopically at intervals during the lysis to determine the extent of the cellular removal. Generally this requires between 10 and 12 min for complete lysis of the osteoblasts.
Carefully and quickly rinse OBM twice with approximately 1 ml sterile dH₂O.
Carefully and quickly rinse twice as above with approximately 1 ml PBS.
Place solution over the matrix that is appropriate for the subsequent analyses.

Fixation of the OBM in paraformaldehyde (PFA)

Carefully aspirate PBS from OBM.
For a 24-well plate, add 1 ml of 4% PFA in PBS.
Incubate at room temperature for 20 min with gentle rocking.
Rinse 2 times with 1 ml PBS.
Add 1 ml PBS.
Store at 4°C.

Preparation of samples for SEM

Culture osteoblasts on round thermanox coverslips (Nunc, Rochester, NY) inserted into wells of a 6 or 24 well plate.
Fix samples with glutaraldehyde fixative at 4°C overnight. Samples can be stored until further processing at 4°C for up to 4 weeks. CAUTION: Work in the fume hood and wear chemical protective gloves.
Wash 3 times for 10 min in 0.1M sodium cacodylate buffer in dH₂O, pH 7.4
Fix in osmium tetroxide solution for 1 h.
Incubate 2 times for 10 min in dH₂O.
Incubate 2 times for 10 min. in 50% ethanol.
Incubate 2 times for 10 min. in 70% ethanol.
Incubate 2 times for 10 min. in 90% ethanol.
Incubate 2 times for 15 min. in 100% ethanol.
Incubate 2 times for 15 min. in 100% amyl acetate.
Critical point dry.
Mount samples on SEM stubs.
Coat samples with gold using sputter coater.
Store gold coated samples in desiccator until analysis.

DAPI staining to detect residual cells in the OBM

CRITICAL STEP: These analyses are light sensitive. All manipulations should be performed in low light areas. All incubations should be covered with an opaque covering such as aluminium foil.

Remove PFA-fixed matrices from 4°C.
Add 1 ml 0.2% Triton X-100 in PBS (per well in 24 well plate).
Incubate for 20 min at room temperature with gentle rocking.
Wash twice for 5 min with 1 ml PBS at room temperature with gentle rocking.
Add 700 µl of DAPI staining solution to each well (24 well plate).
Incubate for 40-50 min at room temperature on shaker.
Wash twice for 5 min with 1 ml PBS at room temperature with gentle rocking.
Visualise with a fluorescent microscope.

Alizarin red S staining to detect calcified OBM

Remove PFA-fixed matrices from 4°C.
Rinse with 1 ml PBS (24 well plate).
Add 0.5 ml Alizarin S staining solution.
Incubate at room temperature for 5 min with gentle rocking.
Thoroughly wash excess dye from the wells with dH₂O.
Visualise samples with light microscopy for red stained calcified regions.

Collagen type I immunohistochemistry of the OBM

Remove PFA-fixed matrices from 4°C.
Rinse twice with PBS.
Eliminate endogenous peroxidase activity with 3% hydrogen peroxide in PBS for 20 min at room temperature.
Wash samples twice with PBS for 3 min.
Eliminate non-specific protein binding by incubation with NPS blocking buffer for 30 min at room temperature.
Remove NPS blocking buffer.
Add mouse anti-human collagen type I antibody diluted 1:100 in PBS containing 0.1% BSA.
Incubate overnight at 4°C.
Wash samples twice in 0.1% Triton X-100 in PBS for 3 min.
Wash samples in PBS for 3 min.
Add secondary antibody (DAKO LSAB+ kit).
Incubate for 30 min at room temperature.
Wash samples twice in 0.1% Triton X-100 in PBS for 3 min.
Wash samples in PBS for 3 min.
Incubate samples with streptavidin peroxidase for 15 min at room temperature (DAKO LSAB+ kit).
Wash samples twice in 0.1% Triton X-100 in PBS for 3 min.
Wash samples in PBS for 3 min.
Incubate with DAB solution for 5 min at room temperature.
Wash three times in PBS for 3 min.
Develop.
Rinse gently with distilled water to stop reaction.

Preparation of collagen type I coated plates

For a 24 well plate, add 1 ml of collagen type I coating buffer per well and incubate at 4°C overnight.
Aspirate the collagen type I solution.
Rinse twice with 1 ml PBS.
Add 1 ml of BSA blocking solution.
Leave at room temperature for 2 h.
Remove solution and rinse twice with PBS
Add 1 ml PBS.

Growth of PC3 and LNCaP prostate cancer cells on the OBM

Culture PC3 and LNCaP cells in growth medium to 50-80% confluence.
Aspirate medium.
Wash once with PBS.
Rinse gently with 0.5mM EDTA in PBS (5 ml/ 75 cm² culture flask).
Add 0.5mM EDTA in PBS (5 ml/ 75 cm² culture flask). Trypsin-EDTA is not used for detachment since this strips the cells of membrane receptors and adhesion molecules required for cell signalling and efficient attachment to the substrata.
Return flask to incubator and incubate at 37°C.
Periodically agitate flask gently.
Periodically monitor cell detachment with a microscope (detachment can take up to 40 min).
Centrifuge cells at 370g for 5min to collect cells.
Resuspend in 10 ml of growth medium.
Remove an aliquot of cells for counting.
Add cells to OBM in growth medium at 1-2x10⁴ cells/cm².
Culture at 37°C in 5% CO₂.

Evaluation of prostate cancer cell viability with FDA and PI

CRITICAL STEP: These analyses are light sensitive. All manipulations should be performed in low light areas. All incubations should be covered with an opaque covering such as aluminium foil.

Rinse OBM plus prostate cancer cells 3 times with PBS.
Incubate with FDA staining solution (2 µg/ml) at 37°C for 15 min in the dark. FDA is a cell-permeant esterase substrate which is hydrolysed by living/viable cells to give green fluorescence.
Rinse 3 times with PBS.
Incubate with PI staining solution (20 µg/ml) at room temperature for 2 min in dark. PI is actively excluded by live cells and thus dead cells in a population are stained red.
Rinse 3 times with PBS.
Add PBS to immerse samples.
Visualise with a fluorescent microscope.

CRITICAL STEP: Take images immediately because the fluorescein, which is formed by intracellular hydrolysis of FDA, rapidly leaks from cells and samples fade.

Phalloidin and DAPI staining to visualize prostate cancer cell morphology

CRITICAL STEP: These analyses are light sensitive. All manipulations should be performed in low light areas. All incubations should be covered with an opaque covering such as aluminium foil. Store samples in the dark.

Remove PFA-fixed matrices from 4°C.
Add 1 ml 0.2% Triton X-100 in PBS (per well in 24 well plate).
Incubate for 20 min at room temperature with gentle rocking.
Wash twice for 5 min with 1 ml PBS at room temperature while gently rocking.
Add 700 µl rhodamine-conjugated phalloidin staining solution to each well (24 well plate). Phalloidin binds to F-actin.
Incubate for 1 h at room temperature with gentle rocking.
Wash twice for 5 min with 1 ml PBS at room temperature while gently rocking.
Add 700 µl of DAPI staining solution to each well.
Incubate for 40-50 min at room temperature with gentle rocking.
Wash twice for 5 min with 1 ml PBS at room temperature while gently rocking.
Visualise with a fluorescent microscope.

Removal of the prostate cancer cells from the OBM for molecular analysis

Aspirate medium and wash once with PBS.
Add 0.5 ml of 0.05% trypsin/0.05 mM EDTA per well of a 24 well dish.
Return to incubator and incubate at 37°C.
Periodically agitate flask gently.
Periodically monitor cell detachment with a microscope. During digestion, removal of cells from the OBM may be assisted by mechanical disruption using a standard pipettor and a 1000 µl tip.
Inactivate trypsin by addition of 1.0 ml of growth medium.
Transfer solution to a 1.5 ml Eppendorf tube.
Centrifuge cells at 1000 g for 5 min.
Wash in 1 ml PBS.
Centrifuge cells at 1000 g for 5 min.
Freeze pellet or resuspend in an appropriate solution (e.g. for RNA extraction).

Critical steps are included in "Procedure" section.

Matrix disrupted or detached.

Washing or rinsing of the cells on the matrix or the decellularized matrix was too harsh. There is often variation in the capacity of matrices secreted by osteoblasts from different patients to adhere to plates. Tilt plate and exchange solutions by slowly and carefully pipetting onto the wall of the well with a standard pipettor using a 1000 µl tip. Process a small number of samples at one time. Alternatively, osteoblasts can be grown and differentiated on thermanox coverslips. The matrix adheres better to these coverslips. However, thermanox coverslips exhibit a certain level of autofluorescence under UV light and may not be suitable for all fluorescent staining procedures. Users should determine whether the level of autofluorescence interferes with their particular downstream application.

Cells difficult to visualize or image in 24 well plates.

Often visualization of cells in 24 well plates is difficult and can be limited to the centre of the well. To image larger areas of the wells, remove most of the PBS, leaving about 50 µl, and place a 13 mm round coverslip carefully on the remaining liquid. Coverslips can be floated off the cells by addition of PBS.

Prostate cancer cells are difficult to remove from matrix.

PC3 and LNCaP cells are removed from the matrix with trypsin-EDTA. The concentration of the trypsin-EDTA and the time taken for cell removal should be determined empirically and is dependent on the cell type. Try higher concentrations of trypsin-EDTA or use other cell detachment solutions. In this regard, we have successfully used collagenase II to remove cells from the matrix. Note that initial attempts to remove the cells with 2 mM EDTA in PBS were unsuccessful even after an hour. This is presumably because of the high calcium content of the matrix.

See attached Figures 1-3.

Gospodarowicz, D., Hirabayashi, K., Giguere, L. and Tauber, J.-P. Factors Controlling the Proliferative Rate, Final Cell Density, and Life Span of Bovine Vascular Smooth Muscle Cells in Culture. J. Cell Biol. 89; 568-578 (1981).

Download PDF

Version 1

posted

You are reading this latest protocol version

Preparation of mineralised matrices secreted from human primary osteoblasts for analysis of the interaction of cancer cells and the bone microenvironment

Status:

Version 1

Figures

Introduction

Reagents

Procedure

Critical Steps

Troubleshooting

Anticipated Results

References

Status:

Version 1

Privacy Policy

Terms of Service

Preparation of mineralised matrices secreted from human primary osteoblasts for analysis of the interaction of cancer cells and the bone microenvironment

Status:

Version 1

Figures

Introduction

Reagents

Procedure

Critical Steps

Troubleshooting

Anticipated Results

References

Status:

Version 1

Privacy Policy

Terms of Service

Manage Cookie Preferences